Fabrication , Spark + Combination, Designed, made, and measured under one roof.

We design and build in the same building as Spark Fabrication’s 4,000 ft² industrial machine shop, in Richmond, BC. We make a part, test it, measure it, and change it under one roof, with far less waiting on outside vendors.

For the projects we engineer, yours included. Parts only? Spark Fabrication takes orders directly

Fig. 1 · Spark Fabrication at work · Video: Spark Laser 00:02 / 00:16

Why it matters

Faster iterations, higher quality.

Rapid Prototyping

Prototypes, fixtures, and test rigs are made beside the people who designed them, so each version comes back sooner.

High Precision

Full 5-axis machining, with parts held to ±0.005″ (about ±0.13 mm) as standard and tighter on suitable features, and checked on a KEYENCE WM-6000 wide-area CMM.

Quick Turnarounds

A design change goes to the shop in the building we share, not to an outside vendor’s queue.

Room to Build

A big workspace with electronics stations, 100 psi compressed-air lines, storage, and tools for quick assembly.

Small or Large Format

From precision 5-axis parts to 5 × 10 ft sheets, welded frames, and large assemblies under a 2-ton crane.

If a project needs it, we can make it or source it.

What the shop makes

From a single fixture to a complete machine.

We use it for the projects we engineer, yours included: product development, R&D, and machine building.

Machined flange and fixtures.
Fig. 2 · Machined flange and fixtures
Machined aluminum components.
Fig. 3 · Machined aluminum components
A red anodized machined aluminum frame on a green assembly bench.
Fig. 4 · Machined frame on the assembly bench
A mobile crane outside the Spark shop in Richmond, BC.
Fig. 5 · Mobile crane outside the shop

Photos: Spark Laser and Spark Fabrication

The facility

4,000 ft² in Richmond, BC.

Two combined shops: precision machining on one side, steel fabrication and welding on the other. Having both under one roof means faster iterations and tighter tolerances.

Machines in the Spark Fabrication shop
MachineDetail
DMG Mori DMU 75, full 5-axis840 × 500 mm, mill-turn, ±0.005″ standard tolerance
5 × 10 ft CNC routerTool change, 1.5″ aluminum
Trotec Speedy 400 CO₂ laserCutting and engraving
60 W fiber galvo markerPart marking
Steel fabrication and weldingFrames, weldments, structures
Post-machiningWeldments machined true
KEYENCE WM-6000 wide-area CMM3D scanning and inspection, up to 25 m; first-article reports
2-ton crane and heavy liftLarge assemblies
3D printing and prototypingFast iterations

Spark + Combination

Spark Laser

The shop is run by Spark Fabrication, sister company of Spark Laser, our partner company, in the building we share. It makes the parts behind every Spark machine, and the prototypes, fixtures, and parts behind our projects.

Two people at the control panel of the 5-axis DMG Mori DMU 75 machining centre in the Spark Fabrication shop.
Fig. 6 · The DMU 75 in the Spark Fabrication shopPhoto: Spark Laser

Parts only

Need parts made?

The shop is run by Spark Fabrication, and it takes parts orders directly. We don’t take machining-only work ourselves. A precision part or system that needs engineering to make is different: that starts as an engineering project with us.